Quantification of Glycated Hemoglobin in Total Hemoglobin by a Simultaneous Dual-Signal Acquisition Approach.

The glycated hemoglobin (HbA1c) level, which is defined as the ratio of HbA1c to total hemoglobin (tHb, including glycated and unglycated hemoglobin), is considered one of the preferred indicators for diabetes monitoring. Generally, assessment of the HbA1c level requires separate determination of tHb and HbA1c concentrations after a complex separation step. This undoubtedly increases the cost of the assay, and the loss or degradation of HbA1c during the separation process results in a decrease in the accuracy of the assay. Therefore, this study explored a dual-signal acquisition method for the one-step simultaneous evaluation of tHb and HbA1c. Quantification of tHb: graphene adsorbed carbon quantum dots and methylene blue were utilized as the substrate material and linked to the antibody. tHb was captured on the substrate by the antibody. The unique heme group on tHb catalyzed the production of •OH from H2O2 to degrade methylene blue on the substrate, and a quantitative relationship between the tHb concentration and the methylene blue oxidation current signal was constructed. Quantification of HbA1c: complex labels with HbA1c recognition were made of ZIF-8-ferrocene-gold nanoparticles-mercaptophenylboronic acid. The specific recognition of the boronic acid bond with the unique cis-diol structure of HbA1c establishes a quantitative relationship between the oxidation current of the label-loaded ferrocene and the concentration of HbA1c. Thus, the HbA1c level can be assessed with only one signal readout. The sensor exhibited extensive detection ranges (0.200-600 ng/mL for tHb and 0.100-300 ng/mL for HbA1c) and low detection limits (4.00 × 10-3 ng/mL for tHb and 1.03 × 10-2 ng/mL for HbA1c).

Enhancing Glucose Biosensing with Graphene Oxide and Ferrocene-Modified Linear Poly(ethylenimine).

We designed and optimized a glucose biosensor system based on a screen-printed electrode modified with the NAD-GDH enzyme. To enhance the electroactive surface area and improve the electron transfer efficiency, we introduced graphene oxide (GO) and ferrocene-modified linear poly(ethylenimine) (LPEI-Fc) onto the biosensor surface. This strategic modification exploits the electrostatic interaction between graphene oxide, which possesses a negative charge, and LPEI-Fc, which is positively charged. This interaction results in increased catalytic current during glucose oxidation and helps improve the overall glucose detection sensitivity by amperometry. We integrated the developed glucose sensor into a flow injection (FI) system. This integration facilitates a swift and reproducible detection of glucose, and it also mitigates the risk of contamination during the analyses. The incorporation of an FI system improves the efficiency of the biosensor, ensuring precise and reliable results in a short time. The proposed sensor was operated at a constant applied potential of 0.35 V. After optimizing the system, a linear calibration curve was obtained for the concentration range of 1.0-40 mM (R2 = 0.986). The FI system was successfully applied to determine the glucose content of a commercial sports drink.

Study on the anti-cancer activity of α-phenethylamine ferrocenecarboxylic acid co-crystals.

Ferrocene derivatives show a wide range of pharmacological activities in the medical field, especially in the anti-tumor field, and can be used as candidate drugs or lead compounds for the treatment of tumors and other diseases. And α-phenethylamine is an important intermediate for the preparation of fine chemical products. (R)-(+)-1-Phenethylamine ferrocenecarboxylic acid/(S)-(-)-1-phenethylamine ferrocenecarboxylic acid were prepared, named compounds 1 and 2, respectively. Single crystal X-ray diffraction showed that compounds 1 and 2 crystallized in the orthorhombic system space group P21 21 21 , and the crystal structures of compounds 1 and 2 exhibited mirror symmetry. The inhibitory effect of two compounds on SW480, MDA-MB-231, and H1299 cells was tested by MTT colorimetry. The IC50 values of the compounds against cancer cells were also calculated. The anti-cancer effect was more pronounced for compounds in the S-configuration. Compound 2 made the wild-type cancer cells undergo apoptosis, thus preventing cancer; it also had the function of helping the cell gene repair defects.

A signal-on photoelectrochemical aptasensor based on ferrocene labeled triple helix DNA molecular switch for detection of antibiotic amoxicillin.

A sensitive signal-on photoelectrochemical aptasensor for antibiotic determination was constructed based on the energy level matching between ferrocene and CuInS2. P-type CuInS2 microflower was complexed with reduced graphene oxide (CuInS2/rGO) to get photocathode current with good photoelectric conversion efficiency and stability. Then, hairpin DNA (HP) was covalently bonded to the electrode surface. A triple helix DNA (THMS) was used as a molecular switch. After the specific recognition between target and THMS in homogeneous solution, ferrocene labeled probe (Fc-T2) was released. Finally, Fc-T2 was captured by the HP, which leaded the obvious increase of photocurrent for the energy level matching between ferrocene and CuInS2. The increase of the photocurrent signal was proportional to the concentration of target amoxicillin (AMOX), the linear range was 100 fM-100 nM with detection limit of 19.57 fM. Meanwhile, the method has been successfully applied for milk and lake water samples analysis with satisfactory results.

Construction of a Dual-Mode Biosensor with Ferrocene as Both a Signal Enhancer and a Signal Tracer for Electrochemiluminescent and Electrochemical Enantioselective Recognition.

We demonstrate for the first time the construction of a dual-mode biosensor for electrochemiluminescent (ECL) and electrochemical chiral recognition of l- and d-isomers of amino acids, with ferrocene (Fc) as both a signal enhancer and a signal tracer. With the dissolved oxygen as a coreactant, ZnIn2S4 acts as the ECL emitter to generate a weak cathodic ECL signal. Fc can enter into the ß-cyclodextrin (ß-CD) cavity on ZnIn2S4-modified electrode as a result of host-guest interaction. Since Fc can promote H2O and O2 to produce abundant reactive oxygen species (ROS) (e.g., O2·- and ·OH), the ECL signal of ZnIn2S4 can be further amplified with Fc as a coreaction accelerator. Meanwhile, Fc molecules on the ß-CD/ZnIn2S4-modified electrode can be electrochemically oxidized to Fc+ to produce a remarkable oxidation peak current. When l-histidine (l-His) is present, the matching of the l-His configuration with the ß-CD cavity leads to the entrance of more l-His into the cavity of ß-CD than d-histidine (d-His), and the subsequent competence of l-His with Fc on the Fc/ß-CD/ZnIn2S4-modified electrode induces the decrease in both Fc peak current and ZnIn2S4-induced ECL intensity. This dual-mode biosensor can efficiently discriminate l-His from d-His, and it can sensitively monitor l-His with a detection limit of 7.60 pM for ECL mode and 3.70 pM for electrochemical mode. Moreover, this dual-mode biosensor can selectively discriminate l-His from other l- and d-isomers (e.g., threonine, phenylalanine, and glutamic acid), with potential applications in the chiral recognition of nonelectroactive chiral compounds, bioanalysis, and disease diagnosis.

Cascade signal amplification electrochemical biosensor based on AgNPs and ring opening polymerization for determination of Ochratoxin A.

An ochratoxin A (OTA) electrochemical biosensor based on a cascade signal amplification strategy with Ag nanoparticles (AgNPs) and ring opening polymerization (ROP) was constructed. The large specific surface area of AgNPs was used to increase the loading of OTA aptamer on the electrode surface, enhancing the ability to capture OTA as a way to achieve the first signal amplification. The OTA antibody modified with polyethylenimine specifically recognizes the OTA, forming an aptamer-OTA-antibody sandwich structure. The amino group on polyethylenimine initiates the ROP reaction with α-amino acid-n-carboxylic anhydride-ferrocene (NCA-Fc) as the monomer. A large number of electrochemical signal units of ferrocene are introduced into the sensing system for a second signal amplification. By amplifying the signal twice, the sensitivity of the sensor is improved. Under the optimal conditions, the detection range of the sensor is 1 pg·mL-1 ~ 1 µg·mL-1, while the detection limit is as low as 117 fg·mL-1. Moreover, the sensor has the advantages of high sensitivity, good stability and selectivity. Standard addition recovery experiment proved that the sensing system can be successfully used for the detection of OTA in four actual samples with recoveries in the range 90.0 to 113% with RSDs of 0.6 to 5.2%, providing a new idea for the pollution assessment of mycotoxins.

In silico selection of an aptamer for the design of aptamer-modified magnetic beads bearing ferrocene co-immobilized label for capacitive detection of acetamiprid.

In silico evaluation of aptamer/target interactions can facilitate the development of efficient biosensor with high specificity and affinity. In this work, we present in silico, i.e. structural similarity, molecular docking and molecular dynamics selection of the aptamer with sufficient binding properties for acetamiprid (ACE), a nicotine-like pesticide, and its use to design aptamer-modified magnetic beads bearing ferrocene co-immobilized label for capacitive detection of ACE. Taking advantages of the aptamer higher stability and binding affinity, the specific properties of magnetic beads and the redox properties of ferrocene moiety, the developed aptasensor showed promising analytical performances for ACE detection, using electrochemical capacitance spectroscopy, with a linear response ranging from 1 fM to 100 pM and a limit of detection of 0.94 fM (S/N = 3). Furthermore, it was successfully applied to detect ACE in fortified tomatoes samples, proving a promising approach for routine detection of pesticide in real agricultural samples.

A GSH-activated AIE-based polymer photosensitizer for killing cancer cells.

Developing efficient photosensitizers which are sensitive to therapeutic tumor signals, but non-toxic to normal cells has always been a tremendous challenge in photodynamic therapy (PDT) process. Herein, a novel copolymer P1 was developed by ring-opening metathesis polymerization (ROMP) with disulfide bond linked ferrocene-norbornene dyad NB-SS-PyFc and the aggregation-induced emission (AIE) fluorephore anchored norbornene NB-TPE, and its nanoparticles (NPs) were obtained by using the amphiphilic Pluronic F-127 as the surfactant via a nanoprecipitation method. The P1 NPs show a weak emission and a low 1O2 generation for the quenching effect from the ferrocene moiety to the AIE group. However, the addition of GSH can recover the AIE fluorephore emission and 1O2 generation for cleavage the disulfide bond. Importantly, P1 NPs have been used for image-guided cancer cells apoptosis for the GSH activated 1O2 generation.

Ferrocene Derivatives as New Generation of Antimalarial Agents: Opportunity or Illusion?

Despite significant scientific progress over the last two decades, malaria remains a global burden that causes thousands of deaths every year. In the absence of effective and practical preventive measures, the only current option for reducing the mortality and morbidity of malaria is chemotherapy. However, due to the minimal stock of active antiparasitic analogs, issues of toxicity, and the repeated appearance of drug resistance, scientists must broaden the arsenal of existing therapies beyond conventional medicinal chemistry. To curb this menace, a series of potential metal-based hybrids have been synthesized and screened. Ferrocene is one of the potent organometallic candidates and the hybridization of ferrocene with other pharmacophores results in compounds with enhanced biological activities. Many researchers have reported the ferrocene compounds as potent pharmacophores and useful as anticancer and antimalarial agents when hybridized with other pharmaceutical hybrids. Drug, such as Ferroquine (FQ, SSR97193), is currently the most advanced organometallic compound developed from the hybridization of ferrocene and chloroquine and has demonstrated great potency in clinical trials against both drug-sensitive and drug-resistant malaria. Not only ferroquine but its derivatives have shown significant activity as antimalarial agents. The present review focuses on the discovery of FQ, the hypothesis of its mode of action, and recent clinical trials of ferrocene compounds as a new class of antimalarial agents. The structure-activity relationship (SAR) of ferrocene derivatives is also discussed to provide insight into the rational design of more effective antimalarial candidates. Finally, efforts have been made to discuss the future expectations for ferrocene-based antimalarial drugs.

Synthesis, Electrochemical and Fluorescence Properties of the First Fluorescent Member of the Ferrocifen Family and of Its Oxidized Derivatives.

The first fluorescent ferrociphenol derivative (P797) has been synthesized via McMurry cross-coupling followed by copper-catalyzed [3 + 2] azide-alkyne cycloaddition of the fluorescent group coumarin. Cyclic voltammograms of P797 exhibit either a monoelectronic oxidation wave ascribed to the ferrocene Fe(II) → Fe(III) conversion or a three-electron oxidation process in the presence of a base, leading to a Fe(III) quinone methide adduct. This general sequence is consistent with those previously described for non-fluorescent ferrociphenols. Furthermore, the fluorescence properties of P797 and its oxidized intermediates appear to strongly depend on the redox state of the ferrocene group. Indeed, electrochemical generation of Fe(III) (ferrocenium) states markedly increases the fluorescence emission intensity. In contrast, the emission of the Fe(II) (ferrocene) states is partially quenched by photoinduced electron transfer (PET) from the Fe(II) donor to the coumarin acceptor and by concentration-dependent self-quenching. Owing to its switchable fluorescence properties, complex P797 could represent an innovative and useful tool to study the biodistribution and the redox state of ferrocifens in cancer cells.

Hydrogen Bonding Drives Helical Chirality via 10-Membered Rings in Dipeptide Conjugates of Ferrocene-1,1'-Diamine.

Considering the enormous importance of protein turns as participants in various biological events, such as protein-protein interactions, great efforts have been made to develop their conformationally and proteolytically stable mimetics. Ferrocene-1,1'-diamine was previously shown to nucleate the stable turn structures in peptides prepared by conjugation with Ala (III) and Ala-Pro (VI). Here, we prepared the homochiral conjugates of ferrocene-1,1'-diamine with l-/d-Phe (32/35), l-/d-Val (33/36), and l-/d-Leu (34/37) to investigate (1) whether the organometallic template induces the turn structure upon conjugation with amino acids, and (2) whether the bulky or branched side chains of Phe, Val, and Leu affect hydrogen bonding. Detailed spectroscopic (IR, NMR, CD), X-ray, and DFT studies revealed the presence of two simultaneous 10-membered interstrand hydrogen bonds, i.e., two simultaneous ß-turns in goal compounds. A preliminary biological evaluation of d-Leu conjugate 37 showed its modest potential to induce cell cycle arrest in the G0/G1 phase in the HeLa cell line but these results need further investigation.

High-sensitive ferrocene labeled aptasensor for the detection of Mucin 1 by tuning the sequence constitution of complementary probe.

A strand displacement-based "signal-off" electrochemical aptasensor is reported for the detection of Mucin 1 (MUC 1) based on a high original signal. Different from the conventional "signal-off" electrochemical biosensors where electrochemical substances are dispersed in electrolyte solution, here the current signal was generated by the complementary probe (CP) associated with ferrocene (Fc) labeled aptamer (Apt.-Fc). Because Apt.-Fc and MUC 1 have a higher affinity, Apt.-Fc dissociates from CP in the presence of MUC 1, resulting in a reduction of detection current signal generated by oxidation of labeled Fc. In this system, high detection signal is necessary to improve the sensor's performance. For this aim, a strategy is proposed for changing the modalities of electron transport and the quantity of Apt.-Fc introduced by simply tuning the sequence constitution of CP. As expected, a high detection current signal was obtained after selecting CP(Apt.-Fc)-TTT as the optimal CP. The aptasensor was then employed to detect MUC 1, and satisfactory detection results with a low detection limit (LOD) of 0.087 pM (S/N = 3), good specificity, good stability, and feasibility of detection of MUC 1 in artificial serum (recovery of 92-101%, RSD of 1.36-5.23%) were obtained.

Forever young: the first seventy years of ferrocene.

The discovery of ferrocene, [Fe(η5-C5H5)2], seventy years ago has significantly influenced chemical research and provided a key impetus for establishing and rapidly expanding organometallic chemistry, which has continued at a rapid pace until now. Over the years of intensive research, the ferrocene unit has been recognised as an extremely versatile platform for ligand design, materials research, and medicinal and analytical chemistry as well as many other research fields. Such wide applications of ferrocene and its derivatives are obviously rooted in the unique combination of the properties of the ferrocene moiety, which exhibits high chemical stability but is amenable to diverse synthetic modifications, has well-defined and highly specific steric properties, and displays defined and tuneable redox behaviour. The unrelenting research activity focused on ferrocene compounds and their widespread applications can be expected to continue even in the future to yield more attractive results in terms of both novelty and function.

Electrochemical Detection of Waterborne Bacteria Using Bi-Functional Magnetic Nanoparticle Conjugates.

Detection of microbial contamination in water is imperative to ensure water quality. We have developed an electrochemical method for the detection of E. coli using bi-functional magnetic nanoparticle (MNP) conjugates. The bi-functional MNP conjugates were prepared by terminal-specific conjugation of anti-E. coli IgG antibody and the electroactive marker ferrocene. The bi-functional MNP conjugate possesses both E. coli-specific binding and electroactive properties, which were studied in detail. The conjugation efficiency of ferrocene and IgG antibodies with amine-functionalized MNPs was investigated. Square-wave voltammetry enabled the detection of E. coli concentrations ranging from 101-107 cells/mL in a dose-dependent manner, as ferrocene-specific current signals were inversely dependent on E. coli concentrations, completely suppressed at concentrations higher than 107 cells/mL. The developed electrochemical method is highly sensitive (10 cells/mL) and, coupled to magnetic separation, provides specific signals within 1h. Overall, the bi-functional conjugates serve as ideal candidates for electrochemical detection of waterborne bacteria. This approach can be applied for the detection of other bacteria and viruses.

Hypoxia responsive nano-drug delivery system based on angelica polysaccharide for liver cancer therapy.

Based on the tumor hypoxic microenvironment and the new programmed cell death mode of combined ferroptosis, an angelica polysaccharide-based nanocarrier material was synthesized. The polymer contains hydrophilic angelica polysaccharide (ASP) that is linked by azobenzene (AZO) linker with ferrocene (Fc), and then the side chain was covalently modified with arachidonic acid (AA). It was postulated that the polymer micelles could work as an instinctive liver targeting drug delivery carrier, owing to the existence of ASP with liver targeting. Moreover, the aim was to engineer hypoxia-responsive polymer micelles which was modified by AA, for selective enhancement of ferroptosis in solid tumor, via diminishing glutathione (GSH) under hypoxia. Finally, we synthesized the amphiphilic polymer micelles AA/ASP-AZO-Fc (AAAF) by self-assembling. The structure of AAAF was confirmed by 1H-NMR and FT-IR. Then, we exemplified the hydrophobic medication curcumin into polymer micelles AAAF@Cur, which has smooth and regular spheres. In vitro release test affirmed that AAAF@Cur can achieve hypoxia response to drug release. In addition, a series of cell experiments confirmed that hypoxia could enhance cell uptake and effectively improve the proliferation inhibitory activity of HepG2 cells. In conclusion, AAAF, as an effective cell carrier, is expected to develop in sensitizing ferroptosis and anti-tumor.

Ferrocene-Labelled Electroactive Aptamer-Based Sensors (Aptasensors) for Glycated Haemoglobin.

Glycated haemoglobin (HbA1c) is a diagnostic biomarker for type 2 diabetes. Traditional analytical methods for haemoglobin (Hb) detection rely on chromatography, which requires significant instrumentation and is labour-intensive; consequently, miniaturized devices that can rapidly sense HbA1c are urgently required. With this research, we report on an aptamer-based sensor (aptasensor) for the rapid and selective electrochemical detection of HbA1c. Aptamers that specifically bind HbA1c and Hb were modified with a sulfhydryl and ferrocene group at the 3' and 5'-end, respectively. The modified aptamers were coated through sulfhydryl-gold self-assembly onto screen printed electrodes, producing aptasensors with built in electroactivity. When haemoglobin was added to the electrodes, the current intensity of the ferrocene in the sensor system was reduced in a concentration-dependent manner as determined by differential pulse voltammetry. In addition, electrochemical impedance spectroscopy confirmed selective binding of the analytes to the aptamer-coated electrode. This research offers new insight into the development of portable electrochemical sensors for the detection of HbA1c.

Pillar[6]arene-Based Supramolecular Nanocatalysts for Synergistically Enhanced Chemodynamic Therapy by the Intracellular Cascade Reaction.

Chemodynamic therapy (CDT) based on the intracellular Fenton reaction has become increasingly explored in cancer treatment. However, the mildly acidic tumor microenvironment and the limited amount of intracellular hydrogen peroxide (H2O2) will create issues for CDT to perform a sustained and high-efficiency treatment. Therefore, how to selectively reduce the pH value and augment the amount of H2O2 in tumor tissues has become the key factor for realizing excellent CDT. Besides, the majority of the reported CDT systems have been constructed from iron-based inorganic or metal-organic framework nanomaterials due to the decisive role of metals in CDT, which restricts the development of CDT. In this study, inspired by the host-guest interactions between pillar[6]arene and ferrocene, a ternary pillar[6]arene-based supramolecular nanocatalyst (GOx@T-NPs) for CDT is reported for the first time. GOx@T-NPs not only exhibited a high-efficiency catalytic ability to convert glucose into hydroxyl radicals (•OH) and to reduce the pH value inside cancer cells for significant enhancement of the CDT effect, but they also showed sensitive glutathione-induced camptothecin (CPT) prodrug release capacity for further improving the efficiency of CDT. Hence, GOx@NPs possessed excellent ability to synergistically enhance the CDT. Additionally, an antitumor mechanism study showed that the prominent tumor inhibition capacity of GOx@T-NPs was derived from trimodal synergistic interactions of CDT, starvation therapy, and chemotherapy. Moreover, GOx@T-NPs manifested good biocompatibility and tumor selectivity with few side effects in major organs. This work broadens the range of materials available for CDT and demonstrates new developments in pillar[n]arene-based multimodal synergistic treatment systems.

Has Ferrocene Really Delivered Its Role in Accentuating the Bioactivity of Organic Scaffolds?

Ferrocene is an important structural core in bioorganometallic chemistry because of its inherent stability, excellent redox properties, and low toxicity. Ferroquine and ferrocifen are two of the most notable contributions of ferrocene to medicinal chemistry with remarkable antimalarial and anticancer properties. The improved medicinal properties of these drug candidates highlight the impact that ferrocene can have on the molecular and biological properties of the bioactive compounds. In this Perspective, we investigate the scope and limitations of ferrocene incorporation into organic compounds/natural products on their mode of action and biological activities. We have also discussed the detailed role of ferrocene modifications in influencing the anticancer, antimalarial, and antimicrobial properties of various bioactive moieties to design safer and promising ferrocene-based drugs.

Ferrocene metallopolymers of intrinsic microporosity (MPIMs).

We show here that non-network metallopolymers can possess intrinsic microporosity stemming from contortion introduced by metallocene building blocks. Metallopolymers constructed from ferrocenyl building blocks linked by phenyldiacetylene bridges are synthesized and possess BET surface areas up to 400 m2 g-1. As solubility imparted by pendant groups reduces porosity, copolymerization is used to simultaneously improve both accessible surface area and solubility. Spectroscopic analysis provides evidence that mixed valency between neighboring ferrocenyl units is supported in these polymers.

A Neophyl Palladacycle as an Air- and Thermally Stable Precursor to Oxidative Addition Complexes.

The utilization of isolated Palladium Oxidative Addition Complexes (OACs) has had a significant impact on Pd-catalyzed and Pd-mediated cross-coupling reactions. Despite their importance, widespread utility of OACs has been limited by the instability of their precursor complexes. Herein, we report the use of Cámpora's palladacycle as a new, more stable precursor to Pd OACs. Using this palladacycle, a series of biarylphosphine ligated OACs, including those with pharmaceutical-derived aryl halides and relevance to bioconjugation, were prepared.